Westinghouse SE 6000 Instrukcja Instalacji Pobierz pdf (Strona 16)

____________________________________________________________________________________________________

HID Corporation 9292 Jeronimo Road Irvine, CA 92618 USA TEL (949) 598-1600 (800) 237-7769 FAX (949) 598-1690

Web page, E-mail - www.prox.com - MultiProx Controller Installation Manual 6000-900 Rev F 16 of 27

O = Odd parity calculated over bits 14 through 25

Pulse Timing

The pulse width is 50 micro-seconds and the time between pulses is 2 milliseconds.

Access Control panel - converting external octal number to “system reporting number”

The SE 1050 cards are identified with an external number. The number is the matching number in decimal

that the card will report when read.

The external number on the Schlage 1030 and 1040 cards are printed in the Octal numbering system. Contact

customer service for a Cross Reference Table that can be provided to correlate the printed numbers and the

decimal number that is typically used in Access Control systems (system reporting number). This conversion can

also be made by a calculating the Decimal number as shown:

1030 Command Card - Octal to Decimal Card Number Conversion

Card number = 5 digits - ABCDE (octal) to convert, add the product of the following:

A x 4096 example: card #54321 5 x 4096

+ B x 512 + 4 x 512

+ C x 64 + 3 x 64

+ D x 8 + 2 x 8

+ E x 1 + 1 x 1

= decimal number = 22737

1040 Command Card - Octal to Decimal Card Number Conversion

Card Number = ABCDEF (octal) to convert: add the product of the following:

A x 32768 example: card# 123456 1 x 32768

+ B x 4096 + 2 x 4096

+ C x 512 + 3 x 512

+ D x 64 + 4 x 64

+ E x 8 + 5 x 8

+ F x 1 + 6 x 1

= decimal number = 42798

Contact HID customer service for information regarding a cross reference list and number conversions.

Installation Aid Diagrams

MultiProx Controller Switch Settings - Figure 3

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 26 27

Brak uwag

Westinghouse SE 6000 Instrukcja Instalacji Strona 16